The fiber plate is composed of various components

The fiber pallet is composed of various components, and the screw holes and installation holes of the nuts need to be checked to ensure that the installation holes of the nuts on the pallet do not interfere with the structure. Carefully check the shape of the tray nuts and the integrity of the coating, and try not to use damaged tray nuts.

Fiber pallet

In addition, general fiber pallets require a service life of more than five years, and shoddy workmanship cannot meet production requirements. Pallets are a large number of auxiliary equipment in the production process of unburned bricks. At the same time, it is required that the flatness of the bottom surface of the tray be 0.01, and the positioning holes for connecting the positioning rivets should ensure an error within 200mm ± 0.01.

In addition, fiber pallets require manual edge grinding to make them more aesthetically pleasing. After rounding the sharp corners, it is stable and can also enhance the local toughness of the brick machine pallet. Therefore, in order to meet the requirements of bricks in the production process of fiber pallets, there are strict material requirements to ensure the smooth production of fiber pallets.

Summary: The tool for fiber pallets is composed of various parts, and different molds are composed of different parts. It mainly achieves the processing of the shape of the object by changing the physical state of the forming material. The precision requirements for the position of rivet holes on the tray for installing rivets are very strict, with a center to center distance of 200mm and a dimensional tolerance controlled within+/-0.01mm. This further increases the difficulty of making your own tooling pallets. Fiber pallets themselves have the ability to withstand pressure and stretch, and after being made into pallets, they will still inherit these advantages. Choose suitable load-bearing parts according to your own situation to prevent fracture and deformation during use.