Industry information

Guidelines for the Use and Selection of Roadside Stone Special Pallets?

  • Date:2026-05-15

Guidelines for the Use and Selection of Roadside Stone Special Pallets

In the core areas of prefabricated concrete component industry such as Linyi, Shandong, the GMT pallet for curbstones has evolved from an auxiliary tool to a core forming mold bottom plate. Its use and selection directly determine the dimensional accuracy, production efficiency, and full life cycle cost of curbstones. This guide is based on engineering empirical evidence, industry standards, and local practices, systematically sorting out key operations and selection logic.

Comparison Table of Core Parameters for Selection

|Selection dimension | Recommended parameters | Basis and explanation | Adaptation to curbstone type|

|Thickness | 20-40mm | ≥ 30mm for heavy-duty transportation and steam curing kiln environments; 20mm suitable for light load and short distance handling | All types|

|Length | 1000-1200mm | Match mainstream C-type and L-type curbstone standard length (1m) to reduce splicing loss | Vertical curbstone, flat curbstone|

|Width | 580-750mm | Match with the width of the curbstone bottom surface to ensure uniform pressure bearing and avoid hanging edges | C-shaped (30-35cm wide), L-shaped|

|Surface treatment | Anti slip texture | Horizontal or grid like grooves to prevent concrete slippage and improve demolding consistency | All types|

|Color | Grey/White | Avoid pure black (carbon black filling), ensure regeneration value and weather resistance | All types|

|Dimensional tolerance | ± 2mm | Fully automated hot pressing to ensure fit with the mold and reduce deformation of curbstones | High precision municipal engineering|

Selection rule: The size of the pallet is equal to the size of the bottom surface of the curbstone plus a safety margin of 5-10mm to ensure that there is no jamming during demolding.

Standardized usage process (five step operation method)

|Steps | Operation Content | Key Points | Risk Warning|

|1. Installation and positioning | Lay the support plate flat on the vibration table or mold frame | Use a level to calibrate to ensure that the flatness of the support plate is ≤ 2mm/m | Tilt the support plate → Uneven top surface of the roadside stone|

|2. Concrete pouring | Pour C30 concrete and vibrate it tightly | Vibration time 3-5 minutes to avoid slight deformation of the support plate caused by excessive vibration | Insufficient vibration → Multiple pores and low strength|

|3. Steam curing | Enter the steam curing kiln (temperature ≤ 180 ℃) | The pallet has a heat resistance of ≥ 140 ° C and can withstand 4-6 hours of constant temperature curing | Temperature exceeds the limit → thermal deformation and delamination|

|4. Demoulding and removal | Mechanical lifting or manual prying | Use non-metallic pry bars to avoid scratching the surface of the pallet | Metal tool scraping → Surface damage → Increased risk of mold sticking|

|5. Cleaning and storage | Water washing+air drying, vertical placement | Strictly prohibit stacking and heavy pressure, avoid long-term exposure to sunlight | Wet stacking → Long term moisture absorption → Decreased dimensional stability|

Demoulding technique: After pouring, let it stand for 1-2 hours until the concrete has initially set before demoulding, which can significantly reduce the sticking rate of the mold.

Common fault diagnosis and solutions

|Fault phenomenon | Possible cause | Solution|

|Concrete mold sticking | There are residual slurry and uncoated release agent on the surface of the support plate | After each demolding, thoroughly clean with a soft bristled brush and water; Can be coated with a thin layer of vegetable oil or specialized demolding wax|

|Partial deformation of the pallet | Overloading use, uncontrolled steam curing temperature, long-term stacking | It is strictly prohibited to exceed 10 tons/piece; Steam curing temperature should be controlled between 160-175 ℃; When stored vertically, add wooden pads between layers|

|Edge cracking | The material is inferior GMT (short cut fiber), which falls off under impact | Choose true GMT (scraped and cut into a woven shape); Use forklift pallets during transportation and prohibit throwing|

|Severe surface wear | Frequent friction with metal molds, lack of regular cleaning | Monthly inspection of surface hardness; If the wear exceeds 0.5mm, it is recommended to return to the factory for repair or replacement|

|Water absorption expansion | PVC filled pseudo GMT for the support plate | Drip test: True GMT if there is no penetration within 1 minute; Stop immediately if water absorption rate>1%|

Quick identification of authenticity:

Scrape → fibers like silk; Drip → Water droplets do not disperse; Knock → residual sound of the bell; Smell → No pungent odor

Comprehensive comparative analysis with traditional pallets

|Comparison items | GMT fiber pallet | Steel pallet | PVC pallet | Wooden pallet|

|Compressive strength | ≥ 4.0 MPa | ≥ 8.0 MPa | ≤ 1.5 MPa | ≤ 2.0 MPa|

|Hot deformation temperature | ≥ 140 ° C | No deformation | ≤ 80 ° C | ≤ 60 ° C|

|Service life | 6-10 years | 3-5 years | 1-2 years | 0.5-1.5 years|

|Weight | 8-12 kg/tablet | 25-35 kg/tablet | 6-9 kg/tablet | 10-15 kg/tablet|

|Corrosion resistance | Acid alkali salt resistance | Easy to rust | Easy to age | Easy to mold|

|Recyclability | 100% melt regeneration | Recyclable, high energy consumption | Difficult to recycle, classified as hazardous waste | Incineration pollution|

|Comprehensive cost (5 years) | Lowest | High (maintenance+replacement) | High (frequent replacement) | Highest (fast wear and tear)|

Economic conclusion: Although the unit price is slightly higher, the 5-year total cost of ownership (TCO) is more than 40% lower than that of steel pallets, making it the preferred choice for municipal engineering.

Environmental Protection and Sustainable Value

Closed loop recycling system: Local recycling enterprises in Linyi (such as Juncheng) recycle over 8 million pieces annually, with a purity of recycled pellets ≥ 95%, used to manufacture new pallets with performance degradation<5%.

Carbon reduction contribution: For every 1 ton of GMT pallet recycled, it is equivalent to reducing 1.75 tons of CO ₂ e emissions and replacing approximately 1.2 tons of native PP plastic.

Non toxic certification: Compliant with RoHS directive, free of formaldehyde, halogens, and heavy metals, suitable for construction around drinking water facilities.

Shandong Juncheng Plastic Sheet Co., Ltd. is located in Linyi City, Shandong Province. The company is a manufacturer of glass fiber pallets, fiber pallets, brick machine pallets, brick machine pallets, and PVC brick machine pallets. Contact address: Dazhuang Economic Development Zone, Yinan County, Shandong Province, China, Phone: 15069997770

The various information published on this website is for reference only and does not represent the position or viewpoint of this website. It does not constitute any investment, medical, legal or decision-making advice. Any actions taken by users based on the information on this website are at their own risk, and this website does not assume any direct or indirect responsibility. This website does not assume any responsibility for the authenticity, accuracy, completeness, or legality of its content.