Industry information

What material is fiberglass support board?

  • Date:2025-09-14

What is the material of fiberglass pallet

Fiberglass pallet, specifically the GMT fiberglass reinforced thermoplastic composite pallet widely used in the field of industrial automation, is essentially a high-performance engineering material formed by the composite of three-dimensional continuous fiberglass felt and thermoplastic resin matrix.

Core material composition

|Composition | Function | Material Type|

|Reinforced phase | Bearing principal stress, impact resistance, deformation resistance | Continuous glass fiber felt (non short cut fiber)|

|Matrix phase | Bonding fibers, isolating the environment, providing toughness | Mainly composed of polypropylene (PP), partially made of polyethylene (PE) or nylon (PA)|

✅ Key structural features: The fibers are randomly distributed in a three-dimensional network, forming a "non directional reinforcement" to avoid the risk of interlayer delamination in traditional laminates and achieve uniform load transmission.

Essence of Material Performance

Lightweight and High Strength: Density of approximately 1.1 g/cm ³, compressive strength ≥ 345 MPa, capable of bearing a heavy load of 10 tons

High temperature steam curing: Long term stable resistance to steam environment of 80-180 ℃, without thermal deformation

Almost zero water absorption: 24-hour water absorption rate<0.5% (GB/T 1034-2008), eliminating strength degradation caused by water molecule infiltration

Recyclable: Thermoplastic matrix supports melt recycling, 100% recyclable, in compliance with green manufacturing standards

Fatigue resistance and durability: Tested through 2 million dynamic cycles without cracks or delamination

The essential difference from inferior imitations

|Comparison item | True GMT pallet | Counterfeit "fiberglass" pallet|

|Fiber morphology | Continuous long fiber three-dimensional felt | Short cut fiber or powder filling|

|Sectional structure | The fibers are clear like woven brocade, without powder shedding | The surface is rough, and powder will fall off upon scratching|

|Water absorption rate | ≤ 0.5% |>2.0%, expansion and deformation after soaking|

|Compressive strength | ≥ 345 MPa |<; 150 MPa, Fragile and cracked|

|Service life | 6-10 years | ≤ 1 year, frequent damage|

Linyi Brick Factory Identification Formula:

Observing fibers, measuring water absorption, and listening to sound——

Authentic cut fibers are like brocade, water droplets do not leak, and the sound of striking is crisp like a bell;

Fake fibers are like dust, absorb water quickly, and make a dull sound when struck.

Material adaptation scenario (based on Linyi industrial environment)

|Application scenarios | Material requirements | Why GMT must be used|

|QT9 Loop Brick Machine | Resistant to 180 ℃ steam and high-frequency vibration | PVC/PP pure plastic will soften and deform, and wood will mold and rot|

|Automated reflux line | Accurate size, low expansion rate | GMT thermal expansion coefficient<0.3%, ensuring no rail jamming|

|Steaming kiln cycle | Long term humid heat, heavy load | Only GMT can maintain 6-10 years without damage, with the lowest cost|

Shandong Juncheng Plastic Sheet Co., Ltd. is located in Linyi City, Shandong Province. The company is a manufacturer of glass fiber pallets, fiber pallets, brick machine pallets, brick machine pallets, and PVC brick machine pallets. Contact address: Dazhuang Economic Development Zone, Yinan County, Shandong Province, China, Phone: 15069997770

The various information published on this website is for reference only and does not represent the position or viewpoint of this website. It does not constitute any investment, medical, legal or decision-making advice. Any actions taken by users based on the information on this website are at their own risk, and this website does not assume any direct or indirect responsibility. This website does not assume any responsibility for the authenticity, accuracy, completeness, or legality of its content.