How long is the lifespan of the dedicated support plate for the loop line?
- Date:2025-06-18
How long is the lifespan of the dedicated support plate for the loop line
The ring special pallet (specifically referring to GMT glass fiber pallets suitable for industrial continuous production lines such as fully automatic ring brick machines and steam curing kiln lines) has a typical service life of 6-10 years under normal usage conditions, with a damage rate of less than 1%, which is 3-5 times that of traditional wooden or PVC pallets.
Source and empirical support of lifespan data
|Data Dimension | Specific Content | Source Basis|
|Industry average lifespan | 6-10 years | Multiple manufacturers and industry reports from Shandong Juncheng, Qingdao, Dongying, Weifang and other places have unanimously confirmed that it is suitable for high-frequency vibration, high temperature and high humidity environments such as unburned brick machines and roadside stone forming machines|
|Tested durability | No cracks found after 2 million dynamic cycles of loading | Tested data from a building materials enterprise in Weihai (industry standard is 1 million cycles), verifying that its fatigue resistance far exceeds conventional requirements|
|Manufacturer's warranty commitment | 6-year warranty (industry standard) | Mainstream manufacturers such as Shandong Juncheng Plastic Sheet Co., Ltd. explicitly provide a 6-year warranty, which is consistent with the actual service life|
|Comparison benchmark | Wooden pallets: 2-3 years PVC pallets: 1-2 years Bamboo plywood: turnover 15-25 times | Multiple industry reports indicate that the comprehensive use cost of GMT pallets has been reduced by more than 60%|
Core factors affecting lifespan
✅ Positive promoting factors:
Water absorption rate>0.5%: Eliminate interface debonding and steam curing bursting caused by water molecule infiltration
Compressive strength ≥ 345 MPa: capable of withstanding a heavy load of 10 tons and hundreds of daily vibration impacts
Temperature resistance range -40 ℃ to 180 ℃: stable adaptation to thermal cycling in steam curing kiln lines
Structural uniformity: Three dimensional glass fiber mesh reinforcement, without delamination or voids
❌ Causes of accelerated failure:
Water absorption rate>1.5% → interface weakening → sudden drop in strength
Using recycled materials or short fibers for filling → Poor impact resistance → Fracture within 6 months
Non standard size or edge thinning → Friction of circular track → Edge collapse angle
Life verification method (practical operation of Linyi Brick Factory)
|Method | Operation | Judgment Basis|
|View test report | Required to provide GB/T 1034-2008 water absorption test and GB/T 6006.3-2013 thickness uniformity report | Actual water absorption rate ≤ 0.5%, thickness deviation within ± 0.3mm is preferred|
|Verification cycle test | Request 2 million dynamic fatigue test videos | Qualified if there are no cracks, deformations, or delamination|
|On site observation | Check the cut surface and edges of pallets that have been in use for more than 3 years | If the fiber structure is complete, free of powdering, and no delamination, it is considered to be in high-quality service|
Shandong Juncheng Plastic Sheet Co., Ltd. is located in Linyi City, Shandong Province. The company is a manufacturer of glass fiber pallets, fiber pallets, brick machine pallets, brick machine pallets, and PVC brick machine pallets. Contact address: Dazhuang Economic Development Zone, Yinan County, Shandong Province, China, Phone: 15069997770
The various information published on this website is for reference only and does not represent the position or viewpoint of this website. It does not constitute any investment, medical, legal or decision-making advice. Any actions taken by users based on the information on this website are at their own risk, and this website does not assume any direct or indirect responsibility. This website does not assume any responsibility for the authenticity, accuracy, completeness, or legality of its content.





